Mounting Method Options for Gemini Letters
Plain Installation- Plain Mount Letters are shipped without mounting hardware
(as shown below)
Flange Installation- Flange is a flat, 3/16" to 1/2" perimeter on the letter return info which holes can be
drilled. Secure with screws or nails. Wider flange options upon request. Not recommended for letters under 6".
(examples of flange shown below)
Stud Installation- Studs are metal threaded posts on the rear of the letters. Specify stud lengths of 1", 1.5",
2" 3" 4", 5" and 6". Specify if studs need to be in line for brick or block wall mortar joints.
(Brick - 2-5/8" on center; Block - 8" on center)
Mounting Pattern is highly recommended for this option.
Pad Installation- are plastic disks on the rear of the letters. Secure the letters to the wall with silicone
adhesive. (Adjustable of flush pads available upon request.
Pad Mount is only recommended for letters less than 24" tall.
Combonation Installation- Letters have stud through pads on all mounts. Specify if studs need to be in
line for brick or block wall mortar joints. Not for letters under 6"
Other Mounting Options
Brackets are L-shaped
plastic projections
flared outward from
back of the letters.
Wires are stainless steel hooks
inserted into plastic blocks glued
to inside of letter. Available for
flush mounting or with 1/2", 1",  
1.5" or 2" standoffs on the flat
faced letters 6" and up
Foam Filled letters are
filled with rigid urethane
foam and cut flush to the
back edge of the letter.
Available for letters 9"
and smaller. Price is 2
times the plain letter.
Free Standing letters
have 90 degree
mounting brackets for
installing on roofs. Other
angles are also
available upon request.
Price is 3 times plain
letter.